Have you subscribed to Sparklight for your home or office internet needs? Does its professional installation fee seem excessive to you? If you have a smartphone or laptop, you can self-install Sparklight internet and save up to $90. This article will give you all the information and clarity required to set up and make your connection up.
By saving the installation fee, you can buy a high-quality modem for Sparklight and get rid of the monthly rentals too. In the long run, that’s going to save you hundreds, if not more. Irrespective of what you choose, you’ll find a step-by-step guide to activating the connection.
Get Sparklight Self-Install Kit
Once you confirm the subscription and opt for Sparklight self-installation, the ISP will check your neighborhood eligibility and run a credit check. If eligible, you will receive the kit post the requisite connections are completed outside your home.
What Do You Get in Self-Install Kit?
- Welcome letter
- Sparklight self activation instructions
- ISP-provided modem [Read: renting vs buying]
- Modem manual
- Power cord
- Coaxial cable
- Ethernet cable
How To Self-Install Sparklight Internet?
Before you begin with the Sparklight internet installation, it’s essential to complete the connections and decide on the equipment placement. If you are using your modem and router devices, ensure you have all the requisite power cords and accessible power outlets for connecting all the devices.
1. Plug in the Connections
Step 1: Find a coaxial wall outlet. If you have multiple outlets in your home, choose the one most centrally located with easy access to power outlets. Your coaxial wall outlet will look like this:
Step 2: Once you have located your choice of outlet, look for the coaxial cable in the kit. Plug one end of the kit into the wall outlet and the other end into the modem.
Step 3: Fetch the power cord from the kit and plug one end into the modem and the other end into the power outlet nearby.
Step 4: Switch the modem on, and wait until the lights turn stable.
If you are using an Internet + Voice bundle, connect the phone device to the modem.
Step 5: Look for the phone cable and plug one end in the voice port of the modem and plug in the phone. Once you are done, your complete setup will look like this:
2. Activate Sparklight Modem
Step 1: After the lights turn stable, you can connect your mobile/laptop/desktop to the WiFi network using the login credentials given in the label.
Step 2: Once you are connected to WiFi, open a browser, and it will automatically take you to the Sparklight modem activation page.
Step 3: Enter the account details, pin code, and phone number and click on activate.
Step 4: The Sparklight modem activation process may take between 5 to 10 minutes. Do not refresh or close the page.
Once the activation is complete, it will take you to a page, as shown below.
Once the process is successful, you’ll be able to use your internet and phone devices.
Step 5: If you are using your own modem and router as separate devices instead of a single modem-router gateway, you will connect an ethernet cable to the laptop and the other end to the ethernet port in the modem.
3. Connect Devices & Test Connection
Step 1: Once you see the modem activation is successful, you can connect a laptop or mobile gadget and test your connection.
Step 2: Use the credentials from the label and connect to wifi.
Step 3: Open the browser, type in https://fast.com
You’ll find the Sparklight internet speed available for you and the status of your internet connection.
Step 4: If you are using your modem and router setup, you will run an Ethernet cable from the modem to the router’s WAN port. And continue the steps mentioned above.
Self-installation vs Professional Installation
- The self-installation is free, while the Sparklight installation fee can set you down by $90.
- You are free to install Sparklight internet on your own at your convenience, but the professional installation has to be booked with the technician and entails blocking your schedule for the appointment.
- Your service provider decides if your home is eligible for self-installation or not.
- The professional installation comes with on-site support, while you get limited technical support with the self-installation.
Frequently Asked Questions
Yes, you can. The concerned ISP allows you to use your device and activate your internet connection. It involves an additional step of noting down the MAC address of your modem and calling technical support for linking the device with your account.
Once all the devices are connected and the modem is powered up, the process of self-installation takes anywhere between 20-30 minutes to complete. It might take an extra few minutes if you are using your own devices.
Find an active coaxial wall outlet and connect the modem using the coaxial cable in the kit. Plugin in the power cord and turn the device on. Once the modem lights are stable, you can either log in through WiFi or a wired connection to complete the activation process in the browser.
Yes, the self-installation is a simple process and will also save you the Sparklight installation fee. Once you have subscribed to the services and received the self-install kit, you’ll be able to proceed with the installation. Even if you are a networking newbie, the process takes less than an hour, if you have an active internet connection.
You can reach technical support at +1 877-692-2253.
Self-installing Sparklight internet is a straightforward process. While it might appear hard for users new to networking, the above guide will help you install Sparklight internet on your own in less than an hour. Once you have all the connections ready, follow the Sparklight self-activation instructions and have the internet up and running.